Proud to be on the Frontline on the war on terror!

Additional Images

MFI (LONG) BARREL EXTENSION FOR AR15 Shorty PDW Pistols 922r Compliant, 9.375" Long to make a legal 16" Barrel.

AD-SOCOM-UZI-AR15-0.50X28-RT
Designed specifically to fit the AR15 Pistols to extend from 8.65" barrel to BATF 16" Legal Length.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag



Not Available
Was: $65.00
Sale: $45.00
Save: 31%
Save: $20.00

Description

MFI (LONG) BARREL EXTENSION FOR AR15 Shorty PDW Pistols 922r Compliant, 9.375" Long to make a legal 16" Barrel.

MFI Adapter for SOCOM Style Fake Silencer (HK-94 / UZI Length) Fits 1/2 X 28 tpi Right Hand Threaded Barrels.

Also available for 300 Black Out with a 5/8 X 24 tpi thread. (See "Customize Your Item" above)

This page is ONLY for the ADAPTER / BARREL EXTENSION seen as "A" in the photo above.

You may also order (at an additional cost) the SOCOM Fake Silencer seen in the above photo that slides over the top of the ADAPTER via the "OPTIONS" tab.

NOTE: ETA on SOCOM Shrouds is at least 3 months away. This is why we do NOT have them on the option list.

The LAST PHOTO ABOVE is SOCOM Fake Silencer for HK94 / UZI Carbine (Marked "US GOV")

The "OPTIONS" tab gives you Special Discount.


This adapter is weapons grade steel. The length is 238.25mm / 9.375 inches, which if permanently attached will give you about 16.25" of barrel (assuming you have a 7.45" barrel). This added length will give you the much needed barrel length to make a 100% BATF legal rifle.

NOTE: Even though the overall length of this adapter is 9.375" part of that is the threads. As you can only count the threaded area once (threads in the adapter cover the threads on the barrel) the total ADDED LENGTH to any weapons system's barrel would be about 8.775".

NOTE TO SHORTEN: If you want to shorten the adapter / barrel extension you can do so by trimming down the rear end. The largest outer diameter measures about 0.750" in length and currently houses the threads. We can trim down the rear section any portion of the 0.750" (this is the past sticking out the back end of the SOCOM Outer Body in the photo above)and tap the next largest O.D. with the 1/2 X 28 threads for an added $15.00. Note that we do NOT re-plate or paint the trimmed area. If you are using the SOCOM can to cover the barrel extension you can NOT trim more of the rear or ANY of the front as those points are used to stabilize the outer can. If you are using the adapter WITHOUT the outer SOCOM Body then you could trim the front area as well.

If you do trim off the rear end completely... In order to allow the adapter to be completely hidden by the SOCOM Fake Silencer / Barrel Shroud we had to make the wall thickness very thin. Thus; Blind Pinning is NOT really an option. The thin wall lends itself to High Temperature Silver Soldering or you can weld a deep penetrating bead half way (minimum) around the circumference of the O.D. of the barrel / adapter.

So now you can turn your AR15 parts set or AR15 PDW Pistol into a legal semi rifle. This will fit any weapon with a 1/2 X 28 Right Hand Thread. The internal hole diameter that the bullet passes through is 0.468" in diameter. We made this large enough to keep the escaping gases from affecting the bullet trajectory. The larger hole size also helps keep the weight down. In the end this is much lighter than a long 16' barrel version. The weight of the product is only 5.2oz!

Total weight with the SOCOM Uzi / HK94 can is 15.2 oz.

We deliberately made this adapter / barrel extension out of steel so it can easily be to meet BATF permanently attached criteria. All NFA & BATF Rules apply.

Fake Silencers are also known as: Dummy Can, Faux Suppressor, Mock Silencer, Barrel Shroud & Non Functional Sound Suppressor.

No FFL needed, No Special License, No Permit Required & No Special Tax Stamp needed to order.

This accessory does NOT affect the accuracy of the weapon in any way.


MFI AR15 ADAPTER for MFI SOCOM HK94 / UZI FAKE SILENCER COMES WITH:

  • 1 - Adapter / Barrel Extension ONLY

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Shipping Information

  • Item Requires Shipping
  • 0.4 lbs.
  • $2.25

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.



Share MFI (LONG) BARREL EXTENSION FOR AR15 Shorty PDW Pistols 922r Compliant, 9.375" Long to make a legal 16" Barrel. on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.