Proud to be on the Frontline on the war on terror!

MFI SIG 556 Swiss Style 550 / 551 Rear Diopter Sight & Rail (with Fiber Optic Rear) with Choice of Front Sights or No Front Sight (BLACK)

SIG-RAIL-SIGHT-BLACK
Designed specifically to fit the SIG 556 & SIG 551A1 Series Rifles & Pistols.

Was: $395.00
Sale: $175.00
Save: 56%
Save: $220.00

Customize Your Item

- Add a Front Sight Option -
 * required
- No Export / US DOS or US DOC -
 * required
Qty:

Description

As many of you know we have been at this for 7+ years. It was never a matter of… “Could we make it?”, but rather “Can we make a quality product at a reasonable price?” Obviously anyone can make one of these for $1800.00 per unit… I should know as we made 2 prototypes at this price. But very few will be willing to pay that price.

The price you see above reflects the "Cadillac Version" with a Front Hooded Sight Included. By clicking the drop down lists “Customize Your Item” you will either choose the Cadillac / Full Blown Set or be allowed to (Opt Out) and save money.

So yes this is a set you are buying unless you choose not to.

This product is a True Plug & Play item. Just unscrew the 3 bolts that hold your rail on and place our rail on in it’s place. There are no small metal tabs or shims to lose as ours is 100% self contained. We also provide 3 replacement bolts and an Allan Key Wrench.

The Rear Diopter Sight had to be connected to a rail in order for it to be low enough to line up with the ultra low profile of the Original Swiss SIG SANs Front Sights. Yes you can use the Original PE90 / 550 / 551 / 552 / 553 Swiss SIG Front Hooded or Non-Hooded Sights. You can NOT use the SIG 556 USA Hooded Front Sight or any other sight on the market except our MFI SIG SANs Hooded or Non-Hooded front sights.


MFI REAR Diopter Sight & Rail:

I designed these to look like the original SIG PE-90 / SG 551 rear diopter sights that were welded on to the receivers. The parts are NOT exact copies of the originals… Meaning that the parts of the MFI Rear Sight are NOT interchangeable with the original Swiss SANs parts. The design did not allow this and it was more cost effective to not even try.

The Rear Diopter functions exactly like the original and has the exact same markings as the Swiss SANs sight housing. The markings on the Drum / Diopter are also an exact copy of the original with the exception of the #4 which we changed from white to red… it just looked cooler.

As I am not a huge believer in the accuracy of the .223 / 5.56mm cartridge so I only fully tested the number 1 position at 100m. The #2, 3 and 4 designations may or may not be applicable. I did position the holes in the correct location, but not having the time or funds to waste on something I do not really believe in. While the #2 and #3 holes are the right size and position the #3/4 position hole is much smaller than the original and is NOT threaded for the insert of a target peep sight, nor is it likely to be at the correct angle as I do not have one to check against. The Diopter walls have not been counter bored on the inside either, so the walls are thick in that area to accept a thread. As I said... The hole is much smaller so that the customer could MILL a new hole at whatever angle they need and make it work. Sorry you are on your own on this one... just not cost effective to test / check 100% when 99% of the customers will never have the money to buy a SIG SANs target peep sight much less have the need to use it.

Fiber Optic Option: The holes for the fiber optic option in the rear Diopter are also smaller than the original. I did this so that you could buy the sight without the fiber optic and drill the holes out to fit the Tritium Ampules / Tritium Inserts. Due to the short shelf life, cost and pain in the ass import regulations I have no intention of ever offering Tritium anything for sale. Check the forums for suppliers.

Above is a photo showing you the two options side by side (with or without fiber optic).

Materials of Construction:

The Rail, Diopter & Diopter Sled are 4000 series cast aluminum.

The Windage adjustment wheel and other small parts are steel.

Finish: The Rear Sight & Rail are painted to match SIG 556 Black Finish. The Rear Sight is made from special 4000 series aluminum alloy to allow it to flow more consistently into a mold. Unfortunately the non-aluminum alloys used (in particular copper and silica) make it impossible to anodize, so the rear sight and rail are painted like the originals were. The rear sight housing and rail are near 99% finished when they come out of the mold. We tried to retain many of the casting marks and even simulated some of the grind markings found on the original sight housings. I am not aiming for 100% perfection in a product as that is pointless and no cost effective. So if you have a safe queen that is worshipped rather than used... no MFI product is likely to live up to your standards.

At the front of the rail you will see a Swiss Style Cross and Shield. Additionally we have shaped the front of the rail to have a similar cut out that would normally be used for a scope mount, but in this case is strictly cosmetic. I spend a lot of time on the finer points of the design as it is critical to make any product as cool looking as possible. I hope you all approve.

Comes with: 3 – MFI SIG Top Rail Bolts and Allan Key

NOTE: Copying the original as closely as we did has it’s advantages and disadvantages. While we try to maintain the look and style of the original rear sight any deficiencies that exist in the original design will likely come through as well on the reproduction. A good case in point is the Windage Adjustment Knob. Originally designed to use a Swiss Franc Coin to adjust, even the original SANs sights get the paint chipped or the edges of the adjustment slot scratched or damaged in some manner. For this reason we recommend that you adjust the knob by hand (yes possible) to avoid damaging the finish of the knob. The next best option is to use a coin (dime) with thin tape on it. The coin is what was originally used as the slot is dished to receive the rounded edge of a coin and NOT the flat edge of a screw driver.


MFI Front Hooded SIG 550/1/2/3 Sight: IS AVAILABLE

Here is a link for photos and information (same as below) with prices if you wanted to order separately:

http://mfiap.com/i-8688698-mfi-sig-front-hooded-site-includes-fiber-optic-windage-wheel-black-only.html

As mentioned the price on this page reflects the INCLUSION of a Front Sight. I will cover the basics of the Hooded Sight here as that is what most of you are looking for.

The non-hooded version has it’s own page:

http://mfiap.com/i-14390350-mfi-sig-sans-556-552-553-front-flip-up-sight-windage-wheel-see-instructions-for-installation.html

The MFI Front Hooded SIG 550/1/2/3 Swiss Style Sight is basically a direct copy of the original except in aluminum. The sight main body and flip up blade are made from 7071 T-6 Aircraft grade aluminum and are precision CNC. I choose aluminum over steel due to the cost effectiveness and versatility of the material. Obviously it would be pointless to make an identical sight to the original & have it be the same price or even more expensive. Additionally 7071 T-6 aluminum can accept a Military Spec. Hard Coat Anodized Finish making it very durable. The cross over windage adjustment wheel / donut and bolt are weapons grade steel and have a Mil. Spec. Black Oxi coating.

The Front Sight Fiber Optic Blade that flips up and down is interchangeable with an Original Swiss SANs Flip Up Blade with the Tritium insert. So “Yes” you can swap out the MFI blade for a SIG one if you so choose. Note that like all flip up fiber optic or tritium blades... the MFI blade is taller than the stationary front post / blade. I am not sure why SIG and for that matter everyone on the planet does this… I just choose to follow suit. In our case it does allow more light in and thus makes for a much brighter aiming point.

The Finish on the MFI Front sight is black only. This is because of the volume we expect to do is 95% black rails. Hard coat anodizing takes paint very well so if you want yours to be painted. Have at it... Personally I have always had an issue with the heavy coat of paint found on the original Swiss SANs sights (front and rear). Anodizing just looks so much more professional and clean.

The Front Sights comes with the Windage Adjustment Wheel and Allen Key. For those of you with Optics only weapons or do not currently have a front sight... The installation is a bit tedious... Go to this link for full instructions and tips.

Go to this page for Instructions on the installation of the front sight. Click on the "Instructions" tab:

http://mfiap.com/i-14424650-mfi-sig-sans-556-552-553-front-flip-up-sight-narrow-blade.html

Attention Quad Rail Owners: I have been informed by one Quad Rail owner that our Diopter rail does not fit plug and play with is 556P (Pistol Rail). The owner told me that it looks like he has to remove 0.0650" of either the MFI rail or the Quad rail to make it fit.

Sorry I never expected anyone with a quad rail to want one of these as this is a Retro Design. I designed this specifically to fit the Swiss SANs 551 or MFI 556P/2 Hand Guards and to be tight so as to eliminate some of the movement "slop" of the hand guard. I have tested the original SIG USA "SIG 556 Fish Gill" hand guard and the SIG USA Classic / SIG 556 / 551A1 hand guards and they fit fine as well.

So, Yes the MFI SIG 550 Style Diopter Sight & Rail is a hair longer than the stock SIG USA 556 rail. Again this will be a very tight fit for the 3 hand guards I mentioned. Going on is easy as you just press down, coming off is a little harder and in either case you can if you want undo the Diopter Rail (nothing falls out of the bottom like the SIG 556 rail thumb nail does) and reattach the rail. You will not lose zero on the iron sights as the tolerances of the 3 hole set up are very tight.

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Shipping Information

  • Item Requires Shipping
  • 1.1 lbs.
  • $0.10

Customer Reviews

Comment Total Reviews (4)

Wow... Finally a SIG USA 556 I can be proud of!
  • Currently 5/5 Stars

Reviewed by: David06/13/2015 11:22PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
I have been following this product for years and I cannot thank Mike at MFI enough for sticking with this project. I know how many problems he has had over the years with this.

Anyway I got one of each color, Black and Gray. So I will double post this on the other color too.

Fit is perfect. So easy to install and what a differance it makes. The black is almost a perfect match to my SIG 556 upper. Swiss style markings make this product even cooler. Love the Swiss Cross. I have only test fired perhaps 250 rounds as I just got this a day ago. Works perfectly at 100 meters. The 200m position on the drum appears to be right as well. I an not sure as I am using military ball ammo and I do not normally shoot past 100m anyway. I also really like the fiber optic option. I ordered the front hooded sight as well, but as I was in such a hurry to get one I bought the MFI non hooded SIG SANs flip front sight and everything lined right up and dead on. I cannot wait for the hooded sights to get in.

On the Gray Diopter... well this one went on my SIG 551A1 from CDNN and the color match is very close and may be perfect, but the MFI rail color is sort of a semi matt finish where my receiver and lower are more flat. Still way better that the rail that came with the 551A1. I also put the Black rail on the 551A1 and as I have black Swiss furniture on the 551A1 the black MFI rail actually looks great and not out of place at all. I have not shot the 551A1 yet.

Fit and finish are superb. I do not mind the casting marks as they are a reproduction of the originals I am told.

Again... THANK YOU MFI... a small company (one guy I am told) really came through!

Just got mine!
  • Currently 5/5 Stars

Reviewed by: Francis06/13/2015 11:46PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
So cool... Just soooo cooool!!!

Works and looks great... and for $205.00???

Thanks for a great product and best to your mom, I hope she gets better.

I am not the first! Great product.
  • Currently 5/5 Stars

Reviewed by: Ken06/13/2015 11:52PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
I agree with everything the first guy said... works and looks great. The finish under a microscope especially along the rail edge is a little jagged, but so are some of the spots on the rail of my ARs. I understand that this is a cost saving issue... So would I pay more for a super perfect one? Only if I had a safe queen and I do not...

Works great and plan to shoot more tomorrow... just had to pop off a could boxes to see how it worked. Very impressed!

Hands down the best after market company for anything SIG SANs related... especially the customer service and fast shipping.

I bought 2 good ones and 2 blems!
  • Currently 5/5 Stars

Reviewed by: Romeo06/14/2015 12:01AM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
I bought both colors and in 100% good and also as blems.

Blems are hard to spot the damage unless you really look. Good ones are just perfect.

I have actually met the owner at SHOT SHOW a couple of times. Just a real guy who knows his stuff. I am so glad he is in charge of this product as so many others have tried (including SIG USA) and failed making expensive and crappy product.

I have most of the other stuff MFI makes.

If you ever get a chance to meet him, do so. He is not like the others in the industry. Seems to be a regular gun guy... Why California? Isn't that behind enemy lines?

Keep the great product and even better prices coming.

Thanks

You must login to post a review.



Share MFI SIG 556 Swiss Style 550 / 551 Rear Diopter Sight & Rail (with Fiber Optic Rear) with Choice of Front Sights or No Front Sight (BLACK) on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.