Proud to be on the Frontline on the war on terror!

Additional Images

MFI FS2000 Style Muzzle Brake / Barrel Shroud for Beretta CX4 Storm

MB-CX4-FS2000
Designed specifically to fit the Beretta CX4 Storm 9mm Carbine ONLY.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag



Limited Supply: only 1 remaining
Availability: No ETA yet... Ask if none listed... I can convert the regular ones to use on the CX4 on a per order basis. The one listed
Pricing: $95.00

Customize Your Item

- No Export & All NFA Rules Apply -
 * required
Qty:

Description

As no new production is set. I can convert the regular ones (FS2000) to use on the CX4 on a per order basis. Only difference is it has one set screw instead of two.

Muzzle Brakes are also known as: Flash Suppressor, Flash Hider, Flash Hinder & Anti Climb Device.

These are designed for LIVE FIRING.

We test all our Muzzle Brakes & Barrel Shrouds to be 100% sure that they function shot after shot without any problems.

MFI uses the term "Flash Suppressor" ONLY in reference to the shape / look that our Muzzle Brakes have as they are designed to mimic the external appearance of their Military Counterparts. The fact is that all our Muzzle Brakes have ZERO Flash Suppression and little if any Anti-Climb effects during shooting. This is because we bore out the forward section with a straight through hole to allow the customer to adjust / fine tone the exact Overall Length of the weapon to achieve the best looking and 100% legal result.


This Version of the MFI FNH FS2000 Muzzle Brake is specifically made for the Beretta USA CX4 Storm 9mm Carbine. When we were developing the new Muzzle Brake for the California OAL 30" FS 2000 we thought that this same product looked cool on the Beretta CX4. So all we did was stroke / bore out the center to contour to the naked barrel of the CX4. Cool as this is we only have enough wall thickness to accommodate the 9mm barrel.

The Barrel Shroud / Muzzle Break is held in place by 2 small set screws hidden at the bottom of the Flash Suppressor. These set screws are steel and have cupped tips to dig in and hold the item in place.

2 - Products in 1:

This same product can be either used as a Muzzle Brake (slid forward) or as a Barrel Shroud (slid to the back position).

MFI CX4 Beretta Flash Suppressor & or Muzzle Brake in the forward position.

MFI CX4 Beretta Barrel Shroud. In the back most position.

The above photos show the MFI Beretta CX4 9mm Storm Muzzle Brake and or (can be BOTH) Barrel Shroud in the FNH FS 2000 Style .

NOTE: This product WILL fit in the OEM Beretta Hard Case ONLY in the second configuration shown above. That is to say in the SHORTEST configuration as a Barrel Shroud. It will NOT fit in the case if you push it forward exposing the slots.


This product fits ONLY the Beretta USA CX4 Storm Carbine in 9mm.

Unlike our other products this item is specifically for a VERY LIMITED MARKET and as such is made in very small volumes. Normal production for any other item is 1000 per year minimum. This Special CX4 version we have only made 50 units to test the market. So it goes without saying we have to charge more money for these. We do our best to keep the price down for our valued CX4 customers.

MFI FNH F2000 Style Muzzle Brake / Barrel Shroud does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States. So they are 100% Cosmetic & have ZERO Function. Unlike true vented barrel shrouds / heat shields our products make NO CLAIM to any protection from heat that is generated from the barrel. As you fire, your barrel will heat up and that heat is directly transferred to the MFI Product. Therefore you should NEVER grab hold of the MFI Product if you have fired more than 5 rounds, as you WILL burn your hands.

Obviously it would be impossible for any manufacturer to know every law / regulation / ordinance of every Country, State, County, City or Town on the planet. For this reason you the customer are required to research this issue to be sure you are within the laws of your specific location.

MFI is NOT liable for any item purchased that violates any law(s) or regulation(s) anywhere on the planet.

One would think that common sense would be a good guide line for any issue, but as the US Federal Government lacks any sense of this we are forced to make statements like this.

When MFI is informed of a State's, County's, City's or Town's specific law / regulation / ordinance we will post it here for all to see. We require a copy of the exact wording to verify the validity of the claim.

Specifications

  • Patented Design.
  • 100% Made in the USA!
  • Designed for LIVE FIRE.
  • The made of Weapons Grade Steel.
  • Precision CNC machined from billet.
  • Fits only Beretta CX4 9mm Carbine.
  • Maximum Outer Diameter: Same as the original FNH FS2000.
  • Maximum Length: = 114.82mm or 4.520 inches.
  • Weight: 4.2 ounces!
  • Mil. Spec. Black Oxide to give the unit a semi matt finish.
  • This product WILL fit in the OEM Beretta Hard Case ONLY in the second configuration shown above. That is to say in the SHORTEST configuration as a Barrel Shroud. It will NOT fit in the case if you push it forward exposing the slots.

The MFI Beretta CX4 Muzzle Brake / Barrel Shroud does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.

The MFI Beretta CX4 Muzzle Brake / Barrel Shroud fits the CX4 Storm Rifles in 9mm ONLY WITHOUT ANY MODIFICATION.


This accessory does NOT affect the accuracy of the weapon in any way.


The MFI Beretta CX4 Muzzle Brake / Barrel Shroud slides onto your barrel and we supply 2 set screws located at the bottom that holds item in place. This set screw is steel tipped and makes contact with your barrel. You may use Loctite, Weld or Silver Solder over the set screw to make this more permanent.

Sliding anything over your barrel or using any type of set screw WILL leave a mark. If your are worried about marking or scratching your barrel, this product is NOT for you.

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Details

  • MB-CX4-FS2000
  • MB-CX4-FS2000
  • MFI
  • Available
  • No ETA yet... Ask if none listed... I can convert the regular ones to use on the CX4 on a per order basis. The one listed
  • New

Shipping Information

  • Item Requires Shipping
  • 0.4 lbs.
  • $0.45

Customer Reviews

Comment Total Reviews (3)

Sooo Cooooollll!!!
  • Currently 5/5 Stars

Reviewed by: Brad04/10/2012 09:34PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
I bought this last week on Thursday and got it today (Monday!!) so koodoos on the fast shipping. This brake really completes my CX4 Strom which seemed to be lacking something important at the front end. I searched high and low for all options and every option I found (5) including the Beretta logoed Barrel Shroud turned out to be made by MFI... Anyway... Super nice finish and amazing high end machining. I am so glad that someone pays attention to the CX4 market and prides themselves on making a quality product at a more than far price!

Thanks

Brad

What a differance!!! Wow!!
  • Currently 5/5 Stars

Reviewed by: David09/02/2012 06:24PM

Product ownership: Less than 3 months

Purchased from: MFIAP.COM

Comments:
Bought this to get rid of the stupid bare looking barrel on my CX4... Just what I needed and wanted... Quality is very high and a perfect fit.

THX
Dave

Even better than my Battle Star Galactica FS!
  • Currently 5/5 Stars

Reviewed by: Ken09/16/2012 12:18AM

Product ownership: Less than 3 months

Purchased from: MFIAP.COM

Comments:
When I saw these I had already bought the MFI Battle Star Galactica barrel shroud... so cool I had to buy one... and now I am not sure if I need to buy a second CX4 to put the BSG-FS on or sell it?? Both are cool and really finish off the front end of the CX4!

You must login to post a review.



Share MFI FS2000 Style Muzzle Brake / Barrel Shroud for Beretta CX4 Storm on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.