Proud to be on the Frontline on the war on terror!

Additional Images

MFI SOCOM Fake Silencer for HK 94 & IMI / Vector / CAI Uzi Carbines (US GOV marked)

SOCOM-UZI-HK94-US-GOV
Designed specifically to fit the HK94 Carbine (MP5), IMI / Vector / CAI Uzi Carbine (Full Size) & Special Weapons SP10.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag



Was: $160.00
Sale: $120.00
Save: 25%
Save: $40.00

Customize Your Item

- No Export & All NFA Rules Apply -
 * required
Qty:

Description

Fake Silencers are also known as: Dummy Can, Faux Suppressor, Mock Silencer, Fake Suppressor, Barrel Shroud & Non Functional Sound Suppressor.

This product fits ONLY the HK94, IMI & Vector Uzi Carbine or Special Weapons SP10.

These are designed for LIVE FIRING.

We test all our Fake Silencers to be 100% sure that they function shot after shot without any problems.


This Version of the MFI SOCOM Fake Silencer is Marked / Laser Engraved with the US. Government Property markings similar to those found on the real silencer.

MFI SOCOM Style Fake Silencer for HK 94 & IMI UZI markings of the barrel shroud.

What makes the MFI SOCOM Fake Silencers UNIQUE from all other real or fake silencers is:

The LETTERING / MARKINGS are INDEXABLE to the CORRECT POSITION! The HK-94 or Uzi Carbine Fake Silencer slides over your barrel and is held on by 3 nylon tipped set screws. The nylon tipped set screws will not dent your barrel as much as the steel tipped set screws do. This is High Temperature Nylon so they will NOT melt. If you want steel tipped set screws all you have to do is pull the nylon tips off.

Sliding anything over your barrel or using any type of set screw WILL leave a mark. If your are worried about marking or scratching your barrel, this product is NOT for you.


MFI SOCOM Style Fake Silencer for HK 94 & IMI UZI markings of the barrel shroud.


The above photos shows the MFI SOCOM Fake Silencer for the Heckler and Koch (HK) HK94 or Uzi Carbine to give the look of a suppressed H&K MP5 and the Israeli Military Industries (IMI) Uzi submachine gun.

The SOCOM UZI / HK94 / MODEL is designed for LIVE WEAPONS and will fit: HK94, Hesse MP5, Special Weapons SW5, Bobcat MP5 or any weapon with exposed barrel length greater than 7.75 inches and with outer barrel diameters close to 0.60 (15.4mm) = HK94 or 0.630 (16mm) = UZI.


All outer bodies are marked as you see in these photos, with the only exception being that line with our city, state and zip may reflect our old KY address or our new CA address. As the markings are very small and thus very difficult to photograph (sorry our digital camera does not have a macro setting for extreme close ups) we have provided you with the exact words below.

MARKINGS for SOCOM HK 94 & IMI Uzi MODEL

PART NO. 1S002/94368-UZI-MP5
MFR- 1S002 SER. NO. 60983
NSN: 1005-01-435-1917
U.S. GOV.
MFI MANUFACTURING CO.
Fallbrook CA. 92028 www.mfiap.com
MODEL: SOCOM CAL. .45 ACP


MFI has produced a legal version of the SOCOM Knights Armament Silencer (to meet current BATF specifications for a Fake Silencer / Non-Functional / Cosmetic Only ) here in the USA. MFI has been a Class II BAFT 07 Manufacturer + SOT & a DOD / Military Contractor so we have access to the real thing here to take measurements off of to assure as close a match as possible. The only areas where we deviate from the original in, is that the Depth of the holes are deeper to reduce weight and add a greater 3D effect and the lettering is changed slightly so as not to violate Knights Armament Intellectual Property Rights.

No FFL needed, No Special License, No Permit Required & No Special Tax Stamp needed to order.

All MFI Barrel Shrouds / Fake Silencer / Mock Suppressors / Faux Silencers are 100% Cosmetic & have ZERO Function. Unlike true vented barrel shrouds / heat shields our products make NO CLAIM to any protection from heat that is generated from the barrel. As you fire, your barrel will heat up and that heat is directly transferred to the MFI Product. Therefore you should NEVER grab hold of the MFI Product if you have fired more than 5 rounds, as you WILL burn your hands.

The MFI M4 & SOCOM Style Fake Silencers do NOT reduce muzzle noise or muzzle flash in any way. So these are to the best of our knowledge 100% legal for the regular civilian to own in all 50 US States.

Obviously it would be impossible for any manufacturer to know every law / regulation / ordinance of every Country, State, County, City or Town on the planet. For this reason you the customer are required to research this issue to be sure you are within the laws of your specific location.

MFI is NOT liable for any item purchased that violates any law(s) or regulation(s) anywhere on the planet.

One would think that common sense would be a good guide line for any issue, but as the US Federal Government lacks any sense of this we are forced to make statements like this.

When MFI is informed of a State's, County's, City's or Town's specific law / regulation / ordinance we will post it here for all to see. We require a copy of the exact wording to verify the validity of the claim.

Specifications

Materials of construction:

The Outer Body is entirely made out of Aircraft Grade Aluminum. To keep these as LIGHT WEIGHT as possible we use similar methods of construction as the real silencers. The Outer Tubes are made from stamped plate 6061 T-6 aircraft aluminum to allow the extreme radius on the end of the tube to be formed.

The End Cap with the knurled part extends into the outer tube and is PERMANENTLY ATTACHED to the outer tube thus complying with BATF in regards to NO ACCESS to the inner cavity / air gap. This end cap is CNC machined from billet 7170 T-6 aircraft aluminum to assure lightweight and durability.

The Inner Sleeve is made from aluminum tubing for super light weight. This tubing sandwiched between two PERMANENTLY ATTACHED components keeps with the SPIRIT as well as the LETTER of the law.

Any tampering with this item to separate the two parts will result in the tearing / destruction of the outer tube. We deliberately use very thing aluminum for the tubes so that they basically self destruct if tampered with.


  • Patented Design.
  • 100% Made in the USA!
  • Designed for LIVE FIRE.
  • The main body is made of 6061-T6 AIRCRAFT GRADE ALUMINUM.
  • Precision CNC machined from billet & sheet.
  • Lettering is INDEXABLE / ADJUSTABLE in position.
  • Fits only H&K-94 / HK94, IMI UZI Full Size Carbine and or Special Weapons SW5 or SP-10.
  • Maximum Outer Diameter: = 35.0mm or 1.380 inches.
  • Maximum Length: = 225.8mm or 8.75 inches.
  • Weight: 9.8 ounces!
  • Mil. Spec. Acid Etched (anti-glare)
  • Mil. Spec. Anodized to give the unit a semi flat finish.
  • Professionally Laser Engraved.

The MFI SOCOM Style Fake Silencer does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.

The HK94 / UZI Style SOCOM Fake Silencer / Barrel Shroud fits the H&K 94 and or UZI Carbines WITHOUT ANY MODIFICATION.


This accessory does NOT affect the accuracy of the weapon in any way.


The MFI SOCOM Fake Silencer slides over your barrel and is held on by 4 nylon tipped set screws. The nylon tipped set screws will not dent your barrel as much as the steel tipped set screws do. This is High Temperature Nylon so they will NOT melt. If you want steel tipped set screws all you have to do is pull the nylon tips off.

Sliding anything over your barrel or using any type of set screw WILL leave a mark. If your are worried about marking or scratching your barrel, this product is NOT for you.

You can index / position the laser engraving any where you like as the rotation of the outer body is stabilized / stopped by the set screws that makes contact with your barrel.

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Shipping Information

  • Item Requires Shipping
  • 1.0 lbs.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.



Share MFI SOCOM Fake Silencer for HK 94 & IMI / Vector / CAI Uzi Carbines (US GOV marked) on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.