Proud to be on the Frontline on the war on terror!

Additional Images

MFI 9" Long Barrel Extension with 1/2 X 28 tpi Right Hand Thread with Large 0.692" I.D. Price includes S&H for 1st Class Mail. Super Light Weight. 922r Compliant Part.

AD-M4-USC45-RT-0.50X28-C/G
Designed specifically to fit the AR15 Pistols to extend from 8.50" barrel to BATF 16" Legal Length.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag

Limited Supply: only 6 remaining
Was: $92.00
Sale: $82.50
Save: 10%
Save: $9.50

Customize Your Item

- No Export / US DOS or US DOC -
 * required
- USPS Priority Upgrade -
Qty:

Description

MFI 9 Inch Long Adapter / Barrel Extension for SOCOM & M4 Style Fake Silencers / Barrel Shrouds (HK USC45 / USC-45 Length) 1/2 X 28 tpi Right Hand Thread with Large 0.692" I.D. Price includes S&H for 1st Class Mail. 922r Compliant.

Price INCLUDES USPS 1st Class Mail & Insurance.

If you want FASTER SHIPPING click the "Expedited Shipping" Tab and choose the Priority Mail Upgrade for just $5.75 more.

Also available in other thread patterns (Call or email for details: 760-728-7079 or mfrost@mfiap.com)

This page is ONLY for the ADAPTER / BARREL EXTENSION seen in the 1st photo above.

You may also order (at an additional cost) the M4 or SOCOM Fake Silencer / Barrel Shrouds seen in the above photos that slides over and hides part or all of the extension.


Here are the links to the M4 Style Barrel Shrouds: MFI M4 HK USC45 Blank / No Engraving Fake Silencer / Barrel Shroud

https://mfiap.com/i-7792933-super-sale-mfi-m4-hk-usc45-blank-no-engraving-fake-silencer.html

MFI M4 HK USC45 Kampfswimmer Marked Fake Silencer / Barrel Shroud

https://mfiap.com/i-7792908-super-sale-mfi-m4-hk-usc45-kampfswimmer-marked-fake-silencer.html

MFI SOCOM HK USC 45 Fake Silencer / Barrel Shroud

https://mfiap.com/i-7825643-mfi-socom-hk-usc-45-fake-silencer.html


This adapter / barrel extension is weapons grade steel. The length is 229mm / 9.015 inches, which if permanently attached will give you about 16.25" of barrel (assuming you have a 7.75" barrel). This added length will give you the much-needed barrel length to make a 100% BATF legal rifle. It also qualifies as a 922r Compliant part.

NOTE: Even though the overall length of this adapter is 9.015" part of that is the threads. As you can only count the threaded area once (threads in the adapter overlap the threads on the barrel) the total ADDED LENGTH to any weapons system's barrel would be about 8.50". For example, a 7" barrel with this adapter will end up being only 15.375" long, so too short for BATF 16" legal length. The final length you end up with also depends on how long your threads are. So, when measuring, you measure from the shoulder where the threads bottom out on the barrel backwards to the bolt face. Do not count any threads on the barrel. Then subtract that number from 16" and that is your minimum length or extension required.

NOTE TO SHORTEN THE EXTENSION: If you want to shorten the adapter / barrel extension you can do so by trimming down the front end. The I.D. of the rear section for about 0.750" in length has a 1/2 X 28 thread (I.D. is about 0.486"), but just forward of the threaded area the I.D. of the extension expands to 0.692" wide. This accommodates any caliber up to and including .45 ACP with plenty of room for expanding gas so as not to cause bullet deflection upon point of impact. You can trim it yourself or have us "Custom Cut / Trim it to any length under 9.0". Contact me for a quote... generally it is about $50.00. If you do cut / trim the extension to a shorter length know that the front inside diameter of the shroud MUST seat against the front outer diameter of the barrel. This means that if you shorten the extension by 2 inches then you MUST have at least 2 inches of barrel to cover or the front of the extension will not rest against the front shoulder of the inside of the shroud.

So now you can turn your AR15 parts set or AR15 PDW Pistol into a legal semi rifle. This will fit any weapon with a 1/2 X 28 Right Hand Thread. The internal hole diameter that the bullet passes through is 0.692" in diameter. We made this large enough to keep the escaping gases from affecting the bullet trajectory. The larger hole size also helps keep the weight down. In the end this is much lighter than a long 16' barrel version. The weight of the product is only 5.8oz!


SPECIFICATIONS:

  • 100% Made in the USA!
  • The made of Weapons Grade Steel.
  • Heat Treated to about Rockwell 27.
  • Precision CNC machined from billet.
  • Threaded 1/2 X 28 tpi Right Hand
  • Maximum Length: = 229mm or 9.015 inches.
  • Maximum Barrel Extension: = 215.9mm or 8.50 inches.
  • Maximum I.D. @ 0.692"
  • Weight: 5.8 ounces!
  • Mil. Spec. Black Oxide to give the unit a semi matt finish without any oil on it, otherwise it looks semi-gloss. The Photo has been lightened to show detail and profile.
  • Can be Custom Trimmed / Shortened


The MFI M4 Style Fake Silencers / Barrel Shrouds / Barrel Extensions / Adapters do NOT reduce muzzle noise or muzzle flash in any way. So, these are 100% legal for the regular civilian to own in all 50 US States.

We deliberately made this adapter / barrel extension out of steel so it can easily be to meet BATF permanently attached criteria via MIG or TIG welding. Aluminum extensions are a bad idea as the heat exchange from firing will erode the inside of the aluminum extension very quickly, whereas steel lasts almost forever. All NFA & BATF Rules apply.

Fake Silencers are also known as: Dummy Can, Faux Suppressor, Mock Silencer, Barrel Shroud & Non-Functional Sound Suppressor.

No FFL needed, No Special License, No Permit Required & No Special Tax Stamp needed to order.


MFI 9 Inch Long Barrel Extension COMES WITH:

  • 1 - Adapter / Barrel Extension ONLY

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Details

Shipping Information

  • Item Requires Shipping
  • 0.4 lbs.
  • $2.25

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.



Share MFI 9" Long Barrel Extension with 1/2 X 28 tpi Right Hand Thread with Large 0.692" I.D. Price includes S&H for 1st Class Mail. Super Light Weight. 922r Compliant Part. on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.