Proud to be on the Frontline on the war on terror!

Additional Images

MFI CETME L Style 3 - Prong / Acorn Muzzle Brake for US made CETME L barrels with 1/2 X 28 RH 2022 CA DOJ Compliant Muzzle Brake. Fits Any Weapon with 1/2 X 28 thread & .223 / .556 Exit Hole / Price Includes S&H via 1st Class USPS

CETME-L-3-PRONG-MB-.50X28
Designed specifically to look like the CETME L 3 Prone Flash Suppressor, yet be a true Muzzle Brake.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag

Limited Supply: only 6 remaining
Was: $95.00
Sale: $58.00
Save: 39%
Save: $37.00

Customize Your Item

- USPS Priority Upgrade / 1st In L -
- No Export / US DOS or US DOC -
 * required
Qty:
SHIPPING IS INCLUDED VIA USPS on orders over $82.00 Dollars AND OR If S&H is INCLUDED in the Title / Discription.

Description

MFI CETME L Style 3 - Prong / Acorn Muzzle Brake for US made CETME L barrels with 1/2 X 28 RH 2022 CA DOJ Compliant Muzzle Brake. Fits Any Weapon with 1/2 X 28 thread & .223 / .556 Exit Hole / Price Includes S&H via 1st Class USPS / WARNING: Use only with .223 or smaller bullets.

WARNING: The Exit Hole necks down to 0.234". Use only with .223 / .556 or smaller bullets.

Designed specifically to look like the CETME L 3 Prone Flash Suppressor, yet be a true Muzzle Brake.


California Department of Justice's is deliberately ambiguous on all its definitions. This requires us to read carefully their requirements and comply as best as we can. After reading all the available regulations and definitions we have come to the conclusion that our NEW Muzzle Brakes when installed correctly comply with the current CA DOJ regulations and definitions as "Muzzle Brakes" and NOT "Flash Suppressors” as our "Muzzle Brakes" operate as follows:

  • This particular MFI Muzzle Brake does NOT reduce the amount of flash discharged from the firearm.
  • This particular MFI Muzzle Brake does NOT redirect the flash discharged from the firearm away from the field of view of the shooter.
  • This particular MFI Muzzle Brake DOES IN FACT REDIRECT the flash that normally would be discharged downward from firearm's muzzle UPWARDS INTO THE SHOOTER'S FIELD OF VISION as there are no slots / holes / openings at the bottom of this product, like those normally found on a flash suppressor.
  • This particular MFI Muzzle Brake DOES IN FACT REDIRECT the flash that normally would be discharged forward from firearm's muzzle UPWARDS INTO THE SHOOTER'S FIELD OF VISION as there is a neck down in diameter of the exit hole which forces the flash / gases backward and out the slots in the top of the product.
  • This particular MFI Muzzle Brake is SOLELY MARKETED as a "Muzzle Brake" which provides anti-recoil and downward thrust / anti muzzle climb due to its physical characteristics.
  • This particular MFI Muzzle Brake also conforms with the definition of a "Muzzle Brake" according to the CALGUNS flow chart.

Do not take our word for it... Read the Regs yourself... This is the closest thing we can find on current regulations.

https://d3uwh8jpzww49g.cloudfront.net/sharedmedia/1509343/12-30-doj-proposed-assault-weapons-regulations.pdf

Page #4 (r) covers the definition of a "Flash Suppressor".

Page #4 (x) covers Overall Length, how it is measured and alludes to the Muzzle Brake needing to be permanently attached.

Know Your Rights. Stand Your Ground. Never Surrender!


This Version of the MFI CETME L Muzzle Brake is specifically made for the California and other state's where a true Muzzle Brake is required in order to be 100% in compliance with the current laws.

We carefully maintain the original 3 Prong or Acorn shape of the original Spanish CETME L flash suppressor by having only one open slot, which when timed appropriately will be at the 12 o'clock position on the barrel. We simulate the other 2 slots via cosmetic grooves cut in the 4 and 8 o'clock positions, but the slots do not open to the inside expansion chamber.

You will need a crush or peel washer to get the single open slot correctly timed. In doing so do NOT exceed 10 foot pounds of torque as greater force will remove the tolerance for heat exchange between the barrel and the muzzle brake. MFI does not supply or sell any crush or peel washers as those are normally supplied with your rifle.

This item will fit ANY BARREL with a 1/2 X 28 tpi Right Hand Thread.

Unlike our other products this item is specifically for a VERY LIMITED MARKET and as such is made in very small volumes. Normal production for any other item is 1000 per year minimum. So it goes without saying we have to charge more money for these. We do our best to keep the price down for our valued CA customers. Support the USA and "Buy American" and support all the California based firearms companies and "Buy from a California Dealer or Manufacturer."


  • 1 - Open Slot for Maximum Down Force
  • 2 - Simulated Slots the type found on the Original Spanish CETME L rifles.
  • 100% Made in the USA!
  • The made of Weapons Grade Steel.
  • Heat Treated to about Rockwell 30. .
  • Precision CNC machined from billet.
  • Threaded 1/2 X 28 tpi Right Hand
  • Maximum Length: = 46.65mm or 1.8375 inches / Identical to the original.
  • Weight: 2.2 ounces!
  • 1 - Exhaust Slot venting upward only.
  • Anti-Recoil Attributes
  • Anti-Climb Attributes
  • Exit Hole I.D. @ 0.234"
  • Mil. Spec. Deep, Deep Gray (near black) Phosphate Parkerized to give the unit a semi matte finish. The Photo has been lightened to show detail and profile.


This item WILL REQUIRE a crush washer in order to time the slots to the top for maximum Muzzle Brake Effect. We do NOT sell or provide crush washers. You can reuse the one from your barrel or buy them on-line.


This accessory does NOT affect the accuracy of the weapon in any way.


Muzzle Brakes are also known as and confused with: Flash Suppressor, Flash Hider, Flash Hinder & Anti Climb Device. This however we classify as a MUZZLE BRAKE.

We test all our products to be 100% sure that they function shot after shot without any problems.

So if you are looking for a "MUZZLE BRAKE" using a MFI CETME L Muzzle Brake should be in compliance with the Letter and Spirit of the law.

The MFI Muzzle Brake does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.

No FFL needed, No Special License, No Permit Required & No Special Tax Stamp needed to order.


NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:

In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.

All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop.

Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI.

AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed.

Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning.

Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.


Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Details

  • CETME-L-3-PRONG-MB-.50X28
  • CETME-L-3-PRONG-MB-.50X28
  • MFI
  • Available
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 0.3 lbs.
  • SHIPPING IS INCLUDED VIA USPS on orders over $82.00 Dollars AND OR If S&H is INCLUDED in the Title / Discription.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.



Share MFI CETME L Style 3 - Prong / Acorn Muzzle Brake for US made CETME L barrels with 1/2 X 28 RH 2022 CA DOJ Compliant Muzzle Brake. Fits Any Weapon with 1/2 X 28 thread & .223 / .556 Exit Hole / Price Includes S&H via 1st Class USPS on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

SHIPPING IS INCLUDED on all orders over $82.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.