Proud to be on the Frontline on the war on terror!

Additional Images

Blem MFI 34mm / Steel / Heavy Duty Sniper Rings (PAIR) NO REDUCING Inserts

RING-34-PAIR
Designed specifically to conform to any Weaver or 1913 Picatinny Rail / Mount on the planet.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag

Limited Supply: only 7 remaining
Was: $100.00
Sale: $18.00
Save: 82%
Save: $82.00

Customize Your Item

- No Export / US DOS or US DOC -
 * required
Qty:

Description

BLEMISH: Cosmetic ONLY. Defects in the Black Oxide and Metal Finish (some areas may be visible machining marks / not smooth ) caused us to discount these appropriately. Hard to see in a photos, but expect to see these in person as the finish is not perfect. Very small / light surface rust spots are also possible. We have oiled these heavily.

Great if you plan to paint these or re-finish them yourself. Otherwise IDENTICAL to the regular rings, BUT WITHOUT the 30mm Reducing Inserts".

These rings are specifically designed to be used on any high end sniper, target or hunting scopes with 34mm tubes.. Super Heavy Duty Steel construction for GREATER STABILITY!

Height / Rise: Single Sniper Heavy Duty Ring is available in a 1.100" / (28mm) rise. This means that from the top of the rail / flat top / scope mount surface to the center of the 34mm diameter ring is 1.100" / (28mm).

Every staff member at MFI shoots on a daily basis. We have these rings on many of our weapons that we test. Just a super quality ring at a very reasonable price.

MFI has been working with Premier Reticles for the past year or so to develop a single ring that will meet a number of criteria. Basically the more we manufacture for different applications the more cost effective they become.

The basic premise was to make a ring that fit the following criteria:

  1. Width of the ring should be such that the thickness is adequate to be used for both front and back positions on most scopes, thus eliminating the need for a wider ring in front.
  2. Height of the ring should be the bare minimum that can be used with the Premier Reticles 3-15 power Tactical scope with a 50mm objective lense on a flat rail WITHOUT the lenses cover attached and still clear the rail near the objective lenses. As you can see from our photos below where we use a PTR-91 and a 14" long MFI HK Low Profile Scope Mount, that the front of the objective lense just clears the rail. The outer most ring of the scope (used to provide a lip for the lens cap) fits down into the channel of the picatinny rail.
  3. Height of the ring should be allow minimum clearance for a M14 / M1A when using a ARMS M14 mount in conjunction with the PR 3-15 X 50mm Tactical scope WITH the lenses cover attached and still clear the hand guard near the objective lense.
  4. Height of the ring should be allow acceptable alignment to be used in conjunction with standard PVS-22, PVS-24 and PVS 27 Night Vision scopes. So on a FLAT RAIL the scope height for the 34mm should be within 40% of that of the standard height of the mount for the night vision scope. Ours allows nearly 68% meaning little or no loss in resolution from being off center.
  5. Height of the ring should be allow acceptable clearance, yet still being as low profile as possible to be used in conjunction with the SAKO TRG, Remington 700 or M24 Sniper Variants with standard scope mounts and using the either a Premier Reticles 3-15 X 50mm OBJ Tactical Scope or Premier Reticles 5-25 X 56mm OBJ Tactical Scope WITH the lenses cover attached and still clear the hand guard and or barrel.
  6. Rings should come with both Wrench Nut and Wing Nut / Tool-less style attachment points.
  7. Rings should be made in the USA.


SPECIFICATIONS / SPECIAL FEATURES:

  • 100% Made In the USA.
  • 100% 1913 Mil. Spec. Picatinny.
  • All Steel Construction High Pressure Casting then Precision Machined from 4140.
  • Designed to withstand the recoil of a 50 caliber BMG round.
  • Designed to mount on Standard Dovetail (Weaver) or Picatinny 1913 Style Rails.
  • Held securely by 4 socket head cap screws using a standard allen / hex key (NOT Torques or Phillips) for removal.
  • 34mm Diameter.
  • Overall Length / Thickness: @ 0.850 inch / 21.50 mm.
  • Cross Over Lock Down Bolts are hardened Weapons Grade Steel.
  • Super Knurled Wing Nut attachment for Fast & Easy ON and OFF.
  • BOTH Wing Nuts and Standard Aim Point Style Locking Nuts are supplied at no added cost.
  • Military Matt Black Finish (Black Oxide Coated Mil-C-13924 Standard).
  • Medium Height Profile. (1.100 inch / 28mm rise) [ Top of your rail / mount to center of 34mm hole. ] or 0.435" / 11mm [ Top of your rail / mount to bottom of the 340mm hole. ]
  • Top of ring has slots cut for lighter weight.
  • Weight @ 6.0 oz. (per ring with wing nut.)


Photo of MFI 34mm Heavy Duty Sniper Ring mounted on a SAKO TRG with a Premier Reticles Sniper / Tactical Scope.

Above is a Premier Reticles 3-15 X 50mm OBJ Tactical Scope with a 34mm tube. The rings are MFI 34mm Steel Heavy Duty Standard Height Sniper Rings mounted on a SAKO TRG-22. Note that there is plenty of clearance for even the larger Premier Reticles 5-25 X 56mm OBJ Tactical Scope to be used and still allow the use of the lense cover. The SAKO TRG has about the same if not less clearance as most sniper rifles i.e. Remington 700 / M24 US Army & USMC sniper weapons platforms in the same area.


Photo of MFI 34mm Heavy Duty Sniper Ring mounted on a PSG-1 / HK91 / PTR 91 with a Premier Reticles Sniper / Tactical Scope.

Above is a Premier Reticles 3-15 X 50mm OBJ Tactical Scope with a 34mm tube. The rings are MFI 34mm Steel Heavy Duty Standard Height Sniper Rings mounted our MFI HK Low Profile Scope Mount. The weapon is a PTR-91 / JLD / HK91 / G3 variant / clone that has been dressed up to look like a HK PSG-1 Sniper Rifle. The stock is a Magpul PRS Sniper Stock while the pistol grip and hand guard are genuine HK PSG-1 parts. The fake silencer is an MFI SOCOM Universal mock / non-functional suppressor. You can see that the height of the ring is as MINIMUM as possible and still be able to mount to a flat railed weapons system.

This is also to demonstrate the relationship of the height of the rings to a standard mounting height for the PVS-22, PVS 24 and or PVS-27 night vision optics. While not perfect it does allow nearly 70% compatibility which is well within the Military Spec. for alignment.


Photo of MFI 34mm Heavy Duty Sniper Ring mounted on a JAE M14 Sniper Stock with a Premier Reticles Sniper / Tactical Scope.

Above is a Premier Reticles 3-15 X 50mm OBJ Tactical Scope with a 34mm tube. The rings are MFI 34mm Steel Heavy Duty Standard Height Sniper Rings mounted on a Springfield Armory Super Custom M1A / M14 that I built in 1981 for National Match Competition. The stock is a JAE - 100 Precision Sniper Stock which MFI exports for JAE. JAE is in our opinion the finest stock ever made for the M14 / M1A platform. Note that there is plenty of clearance for even the larger Premier Reticles 5-25 X 56mm OBJ Tactical Scope to be used and still allow the use of the lense cover.

The fake silencer is an MFI SOCOM Universal mock / non-functional suppressor.


34mm Heavy Duty Steel Sniper Scope Rings comes with: (1) Pair of Rings, Wrench Style Locking Nut, Wing Nut / Finger Tightening Style Locking Nut, 30mm Reducing Adapter & Wrench.


TRUST YOUR LIFE TO QUALITY... NOT LOWEST PRICE!


NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:

In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.

All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop.

Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI.

AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed.

Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning.

Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.


Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Details

  • RING-34-PAIR
  • RING-34-PAIR
  • MFI
  • Available
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 0.8 lbs.
  • $2.25

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.



Share Blem MFI 34mm / Steel / Heavy Duty Sniper Rings (PAIR) NO REDUCING Inserts on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

SHIPPING IS INCLUDED on all orders over $82.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.