Proud to be on the Frontline on the war on terror!

Additional Images

(SUPER SALE) 3.939" Long MFI Dragunov SVD / NDM-86 Style Muzzle Brake / Barrel Extension for PSL / FPK .308 or 7.62 X 54R or any weapon with 14mm X 1.0 Pitch LEFT HAND thread. (ETA ?? Maybe 08-01-2019)

Designed specifically to fit the any weapon with this specific thread pattern to simulate the look of the Dragunov SVD / NDM-86 / PSL Style Weapons Platform.


Not Available
Availability: ETA ?? Maybe 08-01-2019
Was: $95.00
Sale: $75.00
Save: 21%
Save: $20.00


ETA ?? Maybe 08-01-2019

3.939" Long MFI Dragunov SVD / NDM-86 Style Muzzle Brake / Barrel Extension for PSL / FPK .308 or 7.62 X 54R or any weapon with 14mm X 1.0 Pitch LEFT HAND thread. WARNING: Use only with .313 or smaller bullets.

WARNING: The Exit Hole necks down to 0.348". Use only with .313 or smaller bullets.

California Department of Justice's is deliberately ambiguous on all its definitions. This requires us to read carefully their requirements and comply as best as we can. After reading all the available regulations and definitions we have come to the conclusion that our NEW SVD Muzzle Brake when installed correctly will comply with the current CA DOJ regulations and definitions as "Muzzle Brakes" and NOT "Flash Suppressors” as our "Muzzle Brakes" operate as follows:

  • This particular MFI Muzzle Brake does NOT reduce the amount of flash discharged from the firearm compared to that of no muzzle device at all when fired. It does in fact redirect more of the flash in to the direct field of view than either no device at all or the standard muzzle device found on a PSL / FPK or similar AK47.This Muzzle Brake does not have a solid / filled in area at the bottom like our other CA DOJ Muzzle Brakes so it will be less effective in the down force than those other brakes, because the other brakes have 3 slots all facing upward to achieve maximum pressure downward as well as forcing all of the gas up into the field of view of the shooter.
  • This particular MFI Muzzle Brake DOES IN FACT REDIRECT most of the flash that normally would be discharged forward from firearm's muzzle UPWARDS INTO THE SHOOTER'S FIELD OF VISION as there is a neck down in diameter of the exit hole which forces the flash / gases backward and out the slots in the top of the product.
  • This particular MFI Muzzle Brake is SOLELY MARKETED as a "Muzzle Brake" which provides anti-recoil due to its physical characteristics.

Do not take our word for it... Read the Regs yourself... This is the closest thing we can find on current regulations.

Page #4 ® covers the definition of a "Flash Suppressor".

Page #4 (x) covers Overall Length, how it is measured and alludes to the Muzzle Brake needing to be permanently attached.

Know Your Rights. Stand Your Ground. Never Surrender!

We have redesigned the original muzzle device of the Russian SVD and Chinese NDM-86 to not only fit the Romanian FPK / PSL WITHOUT any modification, but also to be a true Muzzle Brake as the front exit hole necks down to force gas backwards. The original SVD muzzle devices had no anti-recoil characteristics nor any flash suppression (according to BATF regs definition from 1995 per Underwriter's Lab') built into the weapon. We have addressed this issue and the anti-recoil / felt recoil is reduced by perhaps 25%.

This Version of the MFI SVD Muzzle Brake is specifically made for the California and Maryland Markets to meet the California DOJ & MD minimum overall length of 30" or 29" for the PSL in . 7.62 X 54R and may or may not qualify as a Featureless Ca. Semiautomatic Rifle component. The CA DOJ refuses to rule on any device one way or the other, so it is up to you as to which one is best for your project. We do have other Muzzle Devices that are enclosed on the bottom and thus one more step closer to the letter of the new law.

This item will fit ANY BARREL with a 14mm X 1.0 Pitch Left Hand Thread, the same as found on most AK-47s.

Unlike our other products this item is specifically for a VERY LIMITED MARKET and as such is made in very small volumes. Normal production for any other item is 1000 per year minimum. So it goes without saying we have to charge more money for these. We do our best to keep the price down for our valued CA customers. Support the USA and "Buy American" and support all the California based firearms companies and "Buy from a California Dealer or Manufacturer."

  • Similar Style as Russian SVD
  • 100% Made in the USA!
  • The made of Weapons Grade Steel.
  • Heat Treated to about Rockwell 30. .
  • Precision CNC machined from billet.
  • Threaded 14mm X 1.0 Pitch Left Hand
  • Maximum Length: = 100.25mm or 3.939 inches.
  • Maximum Barrel Extension : = 84.35mm or 3.320 inches.
  • Maximum I.D. @ 0.510"
  • Weight: 4.7 ounces!
  • 5 - Exhaust Slots.
  • Anti-Recoil Attributes
  • Some Anti-Climb Attributes
  • Exit Hole I.D. @ 0.348"
  • Mil. Spec. Deep, Deep Gray (near black) Phosphate Parkerized to give the unit a semi matt finish. The Photo has been lightened to show detail and profile.

NOTE: Even though the overall length of this item is 3.939" part of that is the threads. As you can only count the threaded area once (threads in the product cover the threads on the barrel) so the total ADDED LENGTH to any weapons system's barrel would be about 3.320".

This item fits any weapon with a 14mm X 1.0 Pitch Left Hand threads WITHOUT ANY MODIFICATION. You do however need to remove the existing Flash Suppressor / Flash Hider / Muzzle Device.

This accessory does NOT affect the accuracy of the weapon in any way.

Muzzle Brakes are also known as and confused with: Flash Suppressor, Flash Hider, Flash Hinder & Anti Climb Device. This however we classify as a MUZZLE BRAKE.

We test all our products to be 100% sure that they function shot after shot without any problems.

So if you are looking at doing a "Featureless Rifle" using a MFI SVD Muzzle Brake may or may not be in 100% compliance with the Letter and Spirit of the law.

The MFI Barrel Extension / Muzzle Brake does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.

No FFL needed, No Special License, No Permit Required & No Special Tax Stamp needed to order.


This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.


  • MB-SVD-308
  • MB-SVD-308
  • MFI
  • Temporarily Not Available
  • ETA ?? Maybe 08-01-2019
  • New

Shipping Information

  • Item Requires Shipping
  • 0.3 lbs.
  • $2.35

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.

Share (SUPER SALE) 3.939" Long MFI Dragunov SVD / NDM-86 Style Muzzle Brake / Barrel Extension for PSL / FPK .308 or 7.62 X 54R or any weapon with 14mm X 1.0 Pitch LEFT HAND thread. (ETA ?? Maybe 08-01-2019) on Facebook

Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.