Proud to be on the Frontline on the war on terror!

MFI 5.5" Long Low Profile Scope Mount with SLOTS / WINDOWS to see Serial Numbers on HK MP5 / SP5 & K series / HK94 / PTR 9R 608 / HK91 & HK93 (Universal) / NOT for .22 LR / (Price includes USPS Priority Mail & Insurance)

HK-LOW-5.5-MP5-SLOTS
Designed specifically to fit the HK MP5, HK94, Bobcat, SW5 (9mm) / HK93 & H&K 53, C-93, V93 & V53 (.223) / HK91, HK 41 (NOT MSG90 Style Mounts), HK G3, CETME, PTR91 (.308). These have windows cut to see serial numbers on HK MP5s and V53 Pistols.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag

Limited Supply: only 1 remaining
Was: $195.00
Sale: $147.00
Save: 25%
Save: $48.00
5 5 4

Customize Your Item

- No Export / US DOS or US DOC -
 * required
Qty:
SHIPPING IS INCLUDED VIA USPS on orders over $82.00 Dollars AND OR If S&H is INCLUDED in the Title / Discription.

Description

NOTE: NOT for any of the .22 LR guns. Those are not real MP5s regardless of how they are marked. The Umarex / Walther / ATI / HK MP5 .22 all require our specific mount that is only for the .22 caliber guns.

This mount is for a real 9mm MP5s and Real HK 91s HK93s in .308 and .223.

MFI 5.5" Long Low Profile Scope Mount with SLOTS / WINDOWS to see Serial Numbers on HK MP5 / SP5 & K series / HK94 / PTR 9R 608 / HK91 & HK93 (Universal) / NOT for .22 LR / (Price includes USPS Priority Mail & Insurance)


YES!. This mount WILL FIT PLUG & PLAY the new HK MP5-SP5 / HK SP5.


Our Latest Version. This mount differs from our Regular 5.5" Long HK Low Scope Mount ONLY in that it has 2 WINDOWS / SLOTS cut in the top in order to see the Serial Numbers on HK MP5s, SW5s and Vector 53s. All of the aforementioned have serial numbers stamped on the top of the receivers.

Cutting these slots was a direct request from our Law Enforcement Clients who have to see the serial numbers in order to check them in and out or the weapons lock up area. In most cases the entire serial number is 100% visible. In a few occurrences like on the SW5 it all depends on where they stamped the number. The worst I have seen is on a very early SW5 where you could not see the very first digit. All MP5s and Vector 53s that we saw have numbers that will appear near the center of the slots.

The MFI Low Profile Slotted Scope Mount is the ONLY low profile mount on the market that does not require the mount to be removed in order to see the serial number.


This mount is the ONLY UNIVERSAL scope mount available for all 5 calibers of the H&K MP5 (including HK MP5-SP and MP5K series) / HK 94, HK93 and HK91 style weapons. So YES all 4 center fire calibers: 9mm, .40 S&W, .223 and .308.

We currently have these in the supply chains for all Theaters of Combat Operations including: Iraq and Afghanistan not to forget Law Enforcement / SWAT Teams and Private Military Contracts like BLACKWATER / "Z" throughout the world. So if your Supply Officer does not have any we can sell them directly to you.

MFI HK Low 5.5 Long Scope Mount on Heckler & Koch MP5 on station in Iraq.

Photo Courtesy of: SF Officer, United States Army (The Sand Box).


MFI has a long history of being a Licensed BATF 07 Manufacture with a SOT / Class II & III we get many requests for products that do not exist or for improvements to existing products / ideas on the market. This item is a direct response from US Military requests for a longer scope mount that will fit UNIFORMLY all MP5 and G3 Variants.

Made Specifically for LIVE WEAPONS. In other words this is NOT some toy or piece of airsoft CRAP made of questionable pot metal in foreign factories by people who have never even seen a real machinegun. Others less reputable dealers are known to try to sell items that were intended for airsoft bb guns and hope you do not notice until it is too late... meaning when you are dead due to a failure of their untested / junk product.

MFI is the GENUINE ARTICLE / REAL DEAL that others copy. This is one of the lowest profile mount available on the market. Designed for MP5 or any G3 variant to mount either Red Dots / Aim Points or Conventional Scopes. By far the Most Cost Effective WITHOUT Sacrificing Quality HK Scope Mount on the market.

Note that the attachment mechanism is NOT a quick release style like found on the original HK mounts. We thought about using some sort of quick release but, as we have heard that the Original HK Mount in a tactical situation has been known to un-lock if you accidentally hit that paddle lever. It does take a little more time to mount these (2-3 minutes) but, once they are in place they will never accidentally un-lock.

Additionally we made these with the LOWEST PROFILE possible so that they do NOT interfere with the open / iron sites when a scope is not in place. The profile is so low that there is no reason to remove the mount once it has been attached to the weapon system as it does not interfere with any normal function or cleaning.

Lastly: 100% Picatinny / Mil. Spec. 1913 Correct. Meaning that your expensive LaRue or SWAN Throw Lever / Quick Release / ARMS Scope Rail Mount will lock 100% the way it was intended. We have seen the influx of hundreds foreign made mounts, rings, risers, rails etc. that claim to be Throw Lever compatible but, are NOT. This one is 100% COMPATIBLE!


We also sell a variety of Scope Rings to accommodate most any Scope on the market. Be sure to check these out as we supply photos of several H&K weapons with this mount and rings attached. Diagrams with complete measurements are there to guide you to the right set up.


NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:

In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.

All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop.

Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI.

AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed.

Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning.

Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.


Specifications

  • 100% Made In the USA.
  • 6061 T-6 Aircraft Grade Aluminum (Main Body / Picatinny Rail)
  • Weapons Grade Hardened Steel Legs / Hooks. Mil. Spec. Black Oxide Coating.
  • Patented Design (Utility): US 7,305,789
  • CNC Machined Slots to view Serial Numbers.
  • Hard Anodized Flat Black
  • Light Weight @ 80.00 gr. ( 3.00 oz. )
  • 5.370 Inches ( 136.4mm ) Long.
  • Low Profile Rail Height @ 0.420" ( 10.70mm ).
  • 100% Picatinny / Mil. Spec. 1913 Correct.
  • Tolerance held is + / - 0.001 (less than the thickness of a piece of paper).
  • 4 - Independent Draw Style Hooks for 100% Secure Attachment.
  • 0.255 Inches (5.5mm) of Draw Length to accommodate even CETME / Out of Spec. Weapons.
  • Chamfered Edges for Fast / Easy On & Off in Adverse Conditions.
  • Added Stabilizing Point at the Far End. This keeps a solid contact between the top of your receiver and the scope mount.
  • 3 - Counter Recoil Slots to Mate with your Specific Weapon's Scope Mount Anti-Recoil Blocks.
  • Does NOT Interfere with the iron sights when a scope is not in place. Clear unobstructed view over the rail.


We try to keep the rail as low a profile as possible in order to meet Military requirements of being able to use the iron sights when the optic is removed. The rail height is as high as it can be WITHOUT completely obstruction the view / use of the iron sights. It is inherent of a design like this that the attachment points i.e. the legs that roll over the side of the receiver may conflict with the specific optics mounting solution. Up until this time (01-2013) we have never had an issue with any mounting solution. The following is a list of mounts to avoid. (currently only one known manufacturer, but I will add to it if others make the same mistake).

Again this is an issue ONLY with this specific mount and it's placement directly over one of the legs. It does fit on the rest of the rail without any problem, so it is a matter of personal eye relief.

  • New 2013 EOTech EXPS3 & G33 Magnifier's Throw levers are too wide and hit the top of the MFI leg. This is NOT an issue if using the older models or the SWAN throw lever version.


Weapons

This sleek design allows the operator to flip this scope mount in either direction without blocking the ejection port (As MP5s and G3s have different positions for the recoil stop blocks.). A favorite of Firearms Dealers as they do not have to carry 3-4 different models to fit different weapons platforms. Unlike our competitors (B&T / Brugger + Thomet / EOTech and others) our mount takes less than 3 minutes to mount on the weapon.

Additionally we have ONE MOUNT THAT FITS ALL of the following Real World G3 / MP5 Heckler & Koch Weapons Systems.

WEAPONS SYSTEMS:
  • HK 41 ( NOT MSG90 Style Mount Tabs )
  • HK 91 / HK91
  • HK G3 (All Variants)
  • HK 33
  • HK 53
  • HK 93 / HK93
  • HK 94 / HK94
  • H&K MP5A2 & MP5 A3
  • Heckler and Koch MP5A4 & MP5 A5
  • HK MP5K
  • HK MP5K PDW
  • PTR-91 / JLD (All Variants)
  • Vector 53 (All Variants)
  • Vector 94 (All Variants)
  • Special Weapons SW5 (All Variants)
  • Bobcat Weapons BW-5 (All Variants)
  • Coharie Arms CA5 / CA-5
  • MKE / MKEK (Makina ve Kimya Endüstrisi Kurumu) T-94
  • Century Arms SP5 & AP-5 / NOT the AP5-M or the AP5-P
  • As well as all Standard Size Variants / Clones of MP5 & G3 World Wide; Licensed or Unlicensed i.e. Century, CETME, Greek, Iranian, Pakistani, South African etc. (Weapon MUST have a Recoil Stop Block, see below explanation.)

  • NOTE ON CETME & CLONES: See the photo section above for a photo depiction of the require part. Basically CETME made a number of money saving cut backs on their weapons. Rear sights are never as nice as HK’s and most do not have the recoil stop block and are considered open sight guns only. If there is no Recoil Stop Block then there is nothing keeping the mount (ours or anyone else’s) from walking down the receiver.

    NOTE: G3s with HK Ejection Port Buffers, Carry Handles or any device that rolls over the top of the receiver in the same location as where the mount fits can NOT be used in tandem with our mount. The MFI Low Profile mount lays flat on top of the receiver with near ZERO clearance.


    SPECIAL NOTE GSG5 & UMAREX GUNS: This mount does NOT fit the Umarex Correctly and about 50% of the time does not fit the GSG5 either. The issue is that these 2 weapons copied Airsoft product NOT REAL Weapons, so the center section of the mounting bracket is taller by 0.0850" which does not allow the mount to sit flat and level on the top of the receiver. Additionally the receivers are wider than the real guns (again they both copied Airsoft product) and require special legs / hooks.

    GSG-5 & Umarex Mounts are Available: We have been contracted by HKPARTS.NET to produce a run of the New Version MFI Low Profile 5.5" Long Mount that does have this milled out area & correct size legs / hooks for the GSG5 and Umarex weapons. Contact HKPARTS.NET directly For GSG5 or Umarex weapons systems. Call: 801.440.5060.

    Here is the DIRECT LINK to the HKPARTS.NET product page. NOTE: This will take you OFF MFI's web site.

    http://www.hkparts.net/shop/pc/Umarex-HK-MP5-22-Low-Profile-Scope-Mount-130p2389.htm

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Instructions

  1. Be sure the weapon is unloaded and the safety is on.
  2. Remove all 4 of the small bolts from the mount.
  3. Open / pull outward the bottom of the hook / lock point on all 4 points.
  4. Place the mount on top of the weapon's scope mounting points and press down. While pressure is applied press the mounting points back inward toward the receiver.
  5. Place the small bolts back into the 4 holes and down into the mounting points and tighten by hand to avoid cross threading. Alternate from bolt to bolt as you tighten to keep the mount level. Use a 5/64 allen key / hex wrench to finish tightening (do not over tighten). The mount is now installed. To remove simply reverse the aforementioned instructions.
  6. Never use Loctite or any other thread locking compound as it will take a torch to get the mount off or you will strip the bolt heads.

    The set screw is used to apply pressure down on to the top of the receiver to add stability to the extension area.

    Once attached to the weapon this mount should NOT be removed. It does NOT interfere with the iron sites or any other operation such as cleaning. On and Off removal will result in stripping the threads on the hooks.


Button Head Socket Cap Screw (1 Screw Only) size is #5-40 @ 3/8" long". These can be used on any of our MFI HK Low Profile Scope Mounts.

TORQUE: 5-40 screw for HK Low is 10 in-lbs (NOTE: That is INCH-LBS NOT FOOT-LBS.)

Most customers do not know what a torque wrench is... Much less have one that reads in “Inch Pounds”... That is why I do not list it... in fact I supply the Allen key as 75% of customers do not have a set with the right size either.

You will hand spin on each one no more than 1-2 turns at a time, moving from one screw to the next like a car tire. When the long end of the Allen key begins to bend even slightly in this process, you are done.

Loctite is not needed nor recommended. The tension on the legs from the screw pulling up on the receiver is more than enough to keep the screws from backing out.


We do NOT accept exchanges on modified mounts or on counterfeit / copies of our product.


SPECIAL NOTE ON MOUNTING:
HAND FITTING / TROUBLE SHOOTING

Because there are so many G3 / MP5 variants (genuine and clone) out there & in 6 different calibers, that span 30+ years of manufacturing changes, some hand fitting may be required. The issue mainly stems from the fact that in order to get a good solid fit we have to hold very tight tolerances. The tolerances that the manufacturers hold to are far less stringent. This mount unlike other HK style mounts does NOT squeeze the receiver via a cam mechanism or utilize a side to side lock. We are clamping to the small gusseted shelves in an up and down fashion. This "sandwiching" type of mounting system is far more robust and stable than any side to side type of mount. Again we are dealing with a tolerance of +/- thousands of an inch (less than the thickness of a couple playing cards).

Manufactures of these weapons can easily fall out of spec without knowing because:

  • Some hold tolerances only to +/- hundredths of an inch as there is no solid Mil. Spec. for this area.
  • Using thicker or thinner steel for the stamping.
  • The application of too much paint.
  • Dripping paint over the ledge of the shelf.
  • Use of old or worn tooling.
  • Not making the final milling pass to flatten the shelf / ledge.

MFI has a solution for all of the above out of spec situations.

First and foremost your MFI Low Profile Scope Mount is 100% covered for life from any manufacturing defects.


TROUBLE SHOOTING:

  1. PROBLEM: My MFI mount SLIPS OFF when tightened or does NOT grab the shelf or shelves as it appears the legs / hooks are NOT long (width) enough to make solid contact with the receiver ledge.
  2. ANSWER: For this there are 2 possible answers:

    1. There is a glob of paint / paint drip that is covering the sharp right angle of the lower part of the ledge where the hook / leg hits the receiver. Look to see if this might be the issue. If you cannot see a clear delineation in the shelf that makes a sharp right angle for the ledge then take a probe / hand file / sharp pointed object and run it across the ledge to remove the excess paint.
    2. Your receiver is out of spec and falls in the very narrow spectrum. Contact MFI for a wider / longer reaching hooks / legs. If you are familiar with knocking in and out roll pins we can just send you a set of our special longer legs / hooks. If not you can send us the mount and we can swap out the hooks for you FREE OF CHARGE. You pay only the shipping to us. You will likely still have to hand fit the legs to your receiver as we make these extra long to accommodate the wide variety of out of spec distances. (see below #3)
    3. NOTE: Each steel leg / hook costs us $7.00 to make. So we supply these on a per needed basis only. You may be required to send in the old legs for length verification. Otherwise a set of (2) legs / hooks are available to buy for $15.00 (which includes S&H).


  3. PROBLEM: My MFI mount does NOT sit flat / level on the top of the receiver.
  4. NOTE: There should be a uniform gap / space between the bottom of the mount and the top of the receiver.

    ANSWER: You likely have not fully seated the mount over the anti-recoil stop block (the part sticking up just forward of the rear sight on a G3 (HK 91 / HK 93) or the welded taps in the center of the receiver on a HK MP5). With the mount just sitting on the top of the receiver (no screws or bolts in the hooks / legs) it should sit flat and level. If NOT... Although quite rare... You likely have a CETME, HK Clone or Mid 1980s HK91 build using after market rear sight blocks that have the tower portion (part sticking up) that is too tall. Generally the fastest fix is to file down the tower with a hand file. We are talking about only a few hits with a hand file to knock the high spot down. The other option is to mill out the MFI rail from underneath where we already have the cut out slot.


  5. PROBLEM: I cannot get all of the bolts / screws in the hooks / legs of my MFI HK Low Profile Mount. Meaning... When I look down from the top of the mount, through the hole where the bolt goes in the main body of the mount, I see that the hook / leg is sitting at a slight angle pointing inward towards the center of the receiver. DO NOT force the bolt in as you may cross thread or strip the threaded holes in the legs.
  6. ANSWER: Your receiver is slightly out of spec and falls in the wide receiver spectrum. Remember that we have to gauge our legs for the MOST COMMON tolerance. In this case you actually have a higher quality weapon in that the steel being used is likely a hair thicker than normal. All you have to do is remove a small amount of material from the part of the leg(s) / hook(s) that are not allowing the bolts to go down into. Follow these steps:

    1. First be sure that the mount is centered on the top of the receiver. It is normal to have some side to side play to center the mount. If it is centered then continue to step "b". If NOT then you will need to do step "b" to all legs / hooks in order to have the mount centered on the receiver (this is very rare).
    2. b. Use a hand file or Dremel fiber cutting wheel (use the side of the wheel) & remove a small amount of the material on the leading edge of the leg / hook where the leg / hook hits the receiver ledge / shelf. You need to remove the same amount from ALL of the legs on the 5.5" and 6.5" long mounts. Mounts that have 6 legs you will remove the Same amount of material on ONLY the 4 REAR legs. So try to remove the same amount of material from each leg.
    3. Do NOT remove material from the set of legs forward of the ejection port as this area does not have the shelf / mounting point built into the receiver like the rear does.

      This will take some time and require you to mount and dis-mount the MFI HK Low Profile Mount from the receiver several times. In doing so you will end up with a Rock Solid mounting platform custom fit to your weapon.

      Hand Fitting the MFI HK Low Profile Mount by filing down the tip of the leg.

    NOTE: As a secondary precaution / peace of mind... You can be assured that our scope mount is NOT defective by simply taking it off the weapon completely and screwing in all the bolts. If they all line up and screw down then it is obvious that holes are NOT misaligned. You should always use this type of logic and process of elimination when trouble shooting any issue.


NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:

In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.

All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop.

Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI.

AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed.

Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning.

Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.


Details

  • HK-LOW-5.5-MP5-SLOTS
  • HK-LOW-5.5-MP5-SLOTS
  • MFI
  • Available
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 0.8 lbs.
  • SHIPPING IS INCLUDED VIA USPS on orders over $82.00 Dollars AND OR If S&H is INCLUDED in the Title / Discription.

Customer Reviews

Comment Total Reviews (4)

Finally!!!
  • Currently 5/5 Stars

Reviewed by:

Product ownership: A year or longer

Purchased from: MFIAP.COM

Comments:
I just got home from my 3rd tour and I was really looking forward to seeing this package. Finally someone made a mount that allows us to see the serial numbers of the weapon without taking the mount off. We will have to get these for the base... will make life so much easier to check in and out weapons.

Great idea and even better product. Holds zero 100% and super fast to mount. We have used the non-sloted version on cut down G3s and MP5s for more than 7 years now... No problems at all.

Thanks... Be Safe and Semper Fi MFI...

MSgt USMC

Best Service I have ever gotten for a weapons company!
  • Currently 5/5 Stars

Reviewed by:

Product ownership: Less than 1 year

Purchased from: MFIAP.COM

Comments:
Excellent customer service, I got my question answered on a weekend in 35 minutes. Product is also perfect and fit my SP89 in less than 5 minutes.

THX
Dave

Outstanding Customer Service!
  • Currently 5/5 Stars

Reviewed by:

Product ownership: Less than 3 months

Purchased from: MFIAP.COM

Comments:
I just wanted to let you know I finally installed my scope mount and it fit like a glove. You guys are great and respond to email questions in a timely manner. Keep up the great work. It's hard to find great customer service these days.

Outstanding Customer Service!
  • Currently 5/5 Stars

Reviewed by:

Product ownership: Less than 3 months

Purchased from: MFIAP.COM

Comments:
I just wanted to let you know I finally installed my scope mount and it fit like a glove. You guys are great and respond to email questions in a timely manner. Keep up the great work. It's hard to find great customer service these days.

You must login to post a review.



Share MFI 5.5" Long Low Profile Scope Mount with SLOTS / WINDOWS to see Serial Numbers on HK MP5 / SP5 & K series / HK94 / PTR 9R 608 / HK91 & HK93 (Universal) / NOT for .22 LR / (Price includes USPS Priority Mail & Insurance) on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

SHIPPING IS INCLUDED on all orders over $82.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.