Proud to be on the Frontline on the war on terror!

Additional Images

MFI Battle Star Galactica Barrel Shroud for Beretta CX4 Storm (9mm)

MB-CX4-BSG-9MM
Designed specifically to fit the Beretta CX4 Storm 9mm Carbine ONLY.

USA Flag THIS PRODUCT IS MADE IN THE USA. USA Flag



Was: $95.00
Sale: $58.00
Save: 39%
Save: $37.00

Customize Your Item

- No Export & All NFA Rules Apply -
 * required
Qty:

Description

Muzzle Brakes are also known as: Flash Suppressor, Flash Hider, Flash Hinder & Anti Climb Device.

These are designed for LIVE FIRING.

We test all our Muzzle Brakes & Barrel Shrouds to be 100% sure that they function shot after shot without any problems.

MFI uses the term "Flash Suppressor" ONLY in reference to the shape / look that our Muzzle Brakes have as they are designed to mimic the external appearance of their Military Counterparts. The fact is that all our Muzzle Brakes have ZERO Flash Suppression and little if any Anti-Climb effects during shooting. This is because we bore out the forward section with a straight through hole to allow the customer to adjust / fine tone the exact Overall Length of the weapon to achieve the best looking and 100% legal result.

In this case the end of the barrel is basically sticking out the front end of the barrel shroud. The user should NEVER slide this item forward to that the slots are open. This will cause the product to be un-stable and dangerous to use.


This Barrel Shroud / Fake Muzzle Brake is specifically made for the Beretta USA CX4 Storm 9mm Carbine.

The weapon will fit in the Beretta Hard Case with this attached.

MFI CX4 Beretta Flash Suppressor / Barrel Shroud in the style used on Battlestar Galactica.

The above photos show the MFI Beretta CX4 9mm Storm Battlestar Galactica (BSG) Shroud, which shows the Correct position of the barrel (at the end of the shroud).


This product fits ONLY the Beretta USA CX4 Storm Carbine in 9mm.

Unlike our other products this item is specifically for a VERY LIMITED MARKET and as such is made in very small volumes. Normal production for any other item is 1000 per year minimum. This Special CX4 version we have only made 50 units to test the market. So it goes without saying we have to charge more money for these. We do our best to keep the price down for our valued CX4 customers.

The MFI CX4 Storm Battlestar Galactica Style Muzzle Brake / Barrel Shroud does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.


SPECIAL NOTE ON STYLE & TRADE NAMES: Battlestar Galactica as well as other marks, are Registered Trademarks of NBC Universal and are used on this web site for reference only. This item is NOT manufactured by nor endorsed by NBC Universal. This trademark holder has NO relationship to this product, nor any product offered by MFI.

This is NOT an exact copy of the in anyway of the original screen used prop. We made sure that there were enough differences to avoid any conflict or confusion in the market place. Fact is it would be impossible to make an exact copy as the original prop guns used on the show were cut down and thus became Title II BATF / NFA SBRs (short barreled rifles) and thus restricted by Federal Law.

Thus any mention of or use of trade names is done in reference to the real weapon for which these items are designed to fit on to. No MFI offered product has any Trademarks or other IPR use on it other than our own. We do this to be sure that there is NO CONFUSION IN THE MARKET.

All MFI Barrel Shrouds / Fake Silencer / Mock Suppressors / Faux Silencers are 100% Cosmetic & have ZERO Function. Unlike true vented barrel shrouds / heat shields our products make NO CLAIM to any protection from heat that is generated from the barrel. As you fire, your barrel will heat up and that heat is directly transferred to the MFI Product. Therefore you should NEVER grab hold of the MFI Product if you have fired more than 5 rounds, as you WILL burn your hands.

This product does NOT reduce muzzle noise or muzzle flash in any way. So these are to the best of our knowledge 100% legal for the regular civilian to own in all 50 US States.

Obviously it would be impossible for any manufacturer to know every law / regulation / ordinance of every Country, State, County, City or Town on the planet. For this reason you the customer are required to research this issue to be sure you are within the laws of your specific location.

MFI is NOT liable for any item purchased that violates any law(s) or regulation(s) anywhere on the planet.

One would think that common sense would be a good guide line for any issue, but as the US Federal Government lacks any sense of this we are forced to make statements like this.

When MFI is informed of a State's, County's, City's or Town's specific law / regulation / ordinance we will post it here for all to see. We require a copy of the exact wording to verify the validity of the claim.

Specifications

  • Patented Design.
  • 100% Made in the USA!
  • Designed for LIVE FIRE.
  • The made of 6061 T-6 Aircraft Grade Aluminum.
  • Precision CNC machined from billet.
  • Fits only Beretta CX4 9mm Carbine.
  • Maximum Outer Diameter: = 0.990" / 25mm.
  • Maximum Inner Diameter: = 0.605" / 15.3mm.
  • Maximum Length: = 4.410" / 112.0mm.
  • Weight: 1.8 ounces!
  • YES Weapon will fit in the Beretta Hard Case with this attached.
  • Mil. Spec. Black Anodized to give the unit a semi matt finish.

The MFI Beretta CX4 BSG Muzzle Brake / Barrel Shroud does NOT reduce muzzle noise or muzzle flash in any way. So these are 100% legal for the regular civilian to own in all 50 US States.

The MFI Beretta CX4 Battle Star Galactica Style Muzzle Brake / Barrel Shroud fits the CX4 Storm Rifles in 9mm ONLY WITHOUT ANY MODIFICATION.


This accessory does NOT affect the accuracy of the weapon in any way.


The MFI Beretta CX4 BSG Muzzle Brake / Barrel Shroud slides onto your barrel and we supply 3 set screws located at the rear knurled area that holds the item in place. These set screws are steel tipped and make contact with your barrel. You may use Loctite, Weld or Silver Solder over the set screw to make this more permanent.

Sliding anything over your barrel or using any type of set screw WILL leave a mark. If your are worried about marking or scratching your barrel, this product is NOT for you.


SPECIAL NOTE ON STYLE & TRADE NAMES: Battlestar Galactica as well as other marks, are Registered Trademarks of NBC Universal and are used on this web site for reference only. This item is NOT manufactured by nor endorsed by NBC Universal. This trademark holder has NO relationship to this product, nor any product offered by MFI.

This is NOT an exact copy of the in anyway of the original screen used prop. We made sure that there were enough differences to avoid any conflict or confusion in the market place. Fact is it would be impossible to make an exact copy as the original prop guns used on the show were cut down and thus became Title II BATF / NFA SBRs (short barreled rifles) and thus restricted by Federal Law.

Thus any mention of or use of trade names is done in reference to the real weapon for which these items are designed to fit on to. No MFI offered product has any Trademarks or other IPR use on it other than our own. We do this to be sure that there is NO CONFUSION IN THE MARKET.

Restrictions

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. We ship to all 50 US States as well as all US Territories i.e. Guam & Puerto Rico. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval is AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue.

Details

  • MB-CX4-BSG-9MM
  • MB-CX4-BSG-9MM
  • MFI
  • Available
  • New

Shipping Information

  • Item Requires Shipping
  • 0.2 lbs.
  • $0.45

Customer Reviews

Comment Total Reviews (6)

Makes my CX4 look soooo cooollll!!!
  • Currently 5/5 Stars

Reviewed by: Frank03/19/2012 11:09PM

Product ownership: Less than 3 months

Purchased from: MFIAP.COM

Comments:
I am so pleased with this product. It makes my CX4 look just like the ones on Battlestar Galactica!!

Shipping so unbelivebly FAST as well... 2 days from point of ordering and I am half way across the country from them.

Thanks!!!!

I am now a member of the Colonial Marines!
  • Currently 5/5 Stars

Reviewed by: Brad04/10/2012 09:50PM

Product ownership: Less than 1 month

Purchased from: MFIAP.COM

Comments:
First off I am a super fan of the TV show Battlestar Galactica, so detail is really important to me... I know that the original CX4s use on the show were 13.5 cut down barrels and thus SBR (short barreled rifles) which I can not own in my state.

This brake really completes my CX4 Strom and my Colonial Marine Uniform! I searched high and low for this product and was suprized to find one so close to the original from the show without making my CX4 a SBR.

Super nice finish and amazing high end machining. I am so glad that someone pays attention to the CX4 market and prides themselves on making a quality product at a more than far price!

Thanks

Brad

AWESOME addition to my Beretta CX4 Storm!!!
  • Currently 5/5 Stars

Reviewed by: James08/18/2012 09:22PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
I have always enjoying shooting the Beretta CX4 Storm, but didn't like the extended naked barrel. This barrel shroud is perfect! I love the look on the rifle as well as the light material which adds no real weight to the end of the barrel. Great job!

The best look barrel shroud
  • Currently 5/5 Stars

Reviewed by: tim03/13/2013 07:01PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
After trying to find accessory for bretta cx4 storm this is the best product I have found great quality will buy again I hope y'all come up with some more accessory for the storm!!!!!

Great Product: Gun still fits in factory case.
  • Currently 5/5 Stars

Reviewed by: Timothy08/25/2013 02:23PM

Product ownership: Less than 1 week

Purchased from: MFIAP.COM

Comments:
Great job MFI! I was looking for a muzzle attachment that would still allow my CX4 Storm carbine to fit in the factory plastic case. A lot of the brakes out there make the gun too long, and you end up having to buy a new case, but with the Battle Star Galactica, the gun still fits in the case and looks really cool as well. Thanks!

Perfect In Every Way
  • Currently 5/5 Stars

Reviewed by: Jonathan02/04/2014 01:12PM

Product ownership: Less than 1 year

Purchased from: MFIAP.COM

Comments:
I wanted something to add some flare to my boring looking stock CX4 barrel. This shroud definitely fits the bill. It is extremely well manufactured and looks great on my CX4. It doesn't add a lot of bulk, like most shrouds on the market. It is a perfect addition, whether you are a fan of BSG or not.

You must login to post a review.



Share MFI Battle Star Galactica Barrel Shroud for Beretta CX4 Storm (9mm) on Facebook

Cart
Items: 0
Total: $0.00

Why Shop From MFIAP?

Fast Shipping

FREE SHIPPING on all orders over $100.00 See our detailed shipping rates. 60 Day Money Back on Returns. View our policies and procedures.

Superior Customer Service

Find the answers to commonly asked questions.

Secure Web Transactions

All transactions involving personal information are secured through SSL encryption.