MFI SIG 550 & 551 Style Flash Suppressor for SIG 556

Muzzle Brakes are also known as: Flash Suppressor, Flash Hider, Flash Hinder & Anti Climb Device.

These are designed for LIVE FIRING.

We test all our Muzzle Brakes to be 100% sure that they function shot after shot without any problems.

MFI uses the term "Flash Suppressor" ONLY in reference to the shape / look that our Muzzle Brakes have as they are designed to mimic the external appearance of their Military Counterparts.

---

This product fits any weapon with a threaded barrel in 1/2 X 28 tpi.

Fits All SIG 556 & 522 Style Rifles & Pistols:

• SIG 556 Standard Rifle
• SIG 556 Patrol Rifle
• SIG 556 SWAT Rifle
• SIG 556 Pistol
• SIG 556 Classic Rifle
• SIG 522 Standard Rifle
• SIG 522 Pistol
• CDNN SIG 551A1 Rifle
• West Coast Armory SIG 551 Rifle

---

SIG USA does NOT supply any of their rifles with Flash Suppressors that look like the Original SIG 550 / 551 / SIG SAN / SWISS SIG. Even if you could find an original flash suppressor it would be impossible to mount to the SIG USA rifle or pistol without major modification.

This Flash Suppressor / Muzzle Break WILL allow the use of a standard US / NATO style bayonet (M7, M9 or M11). This flash suppressor has an added 6th cut / slot (originals had 5 slots with lower section being filled to deflect flash). This way you do not need a peel washer to index the FS to the correct location. The peel washers always created a problem in terms of looking incorrect as well in that the original SIG 550/1 flash suppressors were machined in the barrel and thus not removable.

The Flash Signature of the MFI 550/1 & 552 Flash Suppressors / Muzzle Brakes are comparable with original.

NOTE: SIG 556 Rifles & 556 Pistols have the SAME THREAD PATTERN as .223 caliber AR15s / M16s which is 1/2 X 28. This is the same thread pattern we use for this product.

NOTE: As these have uniform flash cuts / venting slots 360 degrees around there is no need for a peel / crush washer.

---

SPECIFICATIONS / SPECIAL FEATURES:

• 100% Made In the USA.
• Weapons Grade Steel / Mil. Spec.
• Heat Treated to about Rockwell 34.
• Threaded 1/2 X 28 tpi. This will fit any AR15 in .223 as well.
• Crush / Peel Washer NOT required.
• Weapons Grade Steel / Mil. Spec. Black Oxide to be a close match to USA SIG barrels.
• As close a copy of the original: We spared no expense to get these absolutely correct.
• Tolerance held is + / - 0.001 (less than the thickness of a piece of paper).
• WILL allow the use of a standard US / NATO style bayonet (M7, M9 or M11).
• Cost Effective: Highest Quality at the lowest price is always our goal. We achieve this by making these in high volume. This equates to greater profits for distributors and re-sellers. Nothing else on the market compares in versatility, quality and cost effectiveness.

---

---

NOTE TO ZEALOUS LEFTIST DEMOCRAT / COMMUNIST ANTI GUN ASSHOLES & THEIR CRONY LAW ENFORCEMENT:

In accordance with the Joe Biden & Beto O’Rourke directive I personally as well my company no longer own(s) or possess any firearms or ammunition. This includes but is not limited to: Handguns, Pistols, Shotguns, Rifles, NFA items, Hog Legs, Fire Sticks, Smoke Poles and or Thunder Clubs.

All firearms that appear on our web site, regardless of what is written about them, are not owned by the company nor possessed by anyone associated with MFI and may even be CGI / PhotoShop.

Therefore regardless of any new firearms laws / taxes, no probable cause can EVER be assumed on any property (stationary or mobile) owed by myself or MFI.

AGAIN: We are 100% in compliance with any possible new “Biden / O’Rourke Public Safety Act” and therefore NO PROBABLE CAUSE could ever be assumed.

Lastly anyone arriving with a warrant of any kind will be assumed to be an IMPOSTER with intent on murdering us and will be treated as such without warning.

Those invading our territory may receive serious and even fatal wounds from rusty blades, clubs with bent nails, spear tips, arrows and or crossbow bolts.

---