MFI SOCOM Style Fake Silencer 1/2 X 28 tpi Right Hand (NEW IMPROVED)

SOLD OUT.

Contact HKPARTS.NET for this item. www.hkparts.net or call 801.440.5060.

Direct link: https://www.hkparts.net/shop/pc/Fake-Suppressor-Threaded-1-2-X-28-198p2035.htm

---

NEW IMPROVED VERSION! We have finally been able to reduce the amount of internal barrel sticking out the front end to just about zero now. Photos are correct and demonstrate a near perfect match to the original cans in terms of the front end.

Fake Silencers are also known as: Dummy Can, Faux Suppressor, Mock Silencer, Barrel Shroud & Non Functional Sound Suppressor.

These are designed for LIVE FIRING.

We test all our Fake Silencers to be 100% sure that they function shot after shot without any problems. Be sure to see our notes on the best ammo to use with this item. Click on the TAB marked "Ammo Issues".

---

This Version of the MFI SOCOM Fake Silencer is Marked / Laser Engraved with the US. Government Property markings similar to those found on the real silencer.

What makes the MFI SOCOM Fake Silencers (SOCOM 1/2 X 28 TACTICAL) UNIQUE from all other real or fake silencers is:

The LETTERING / MARKINGS are INDEXABLE to the CORRECT POSITION! As you may not realize all threaded barrels and silencers have different starting and ending points on the threads. Thus you could have 5 identical weapons all made at the same time and the same silencer or flash suppressor will NOT end up at the same point on each weapon. This is why you get a peel washer with your AR15 flash suppressor (peels off 10 /1000th of an inch) so you can correctly index your suppressor to the individual weapon.

So what we are saying is... No matter how many weapons you have... You will ALWAYS be able to get the lettering / U.S. GOV. markings in the exact location that you want them. This is because there is a set screw is hidden in the bottom of the end cap (see the "x")that allows the outer body to rotate 360 degrees around the inner barrel. First tighten the set screw and then thread the fake silencer on your weapon. Then loosen the set screw and continue the rotation as if to tighten / go on direction... Position the Laser Markings to the correct location & re-tighten the set screw.

You can screw on & off the Fake Silencer and NEVER have to reset the letters / set screw. Obviously this set up is for an individual / specific weapon so if you move the fake silencer to a different weapon you will most likely have to re-index the outer body again.

---

MARKINGS for SOCOM HK 1/2 X 28 MODEL

PART NO. 1S002/94368-HK-1/2X28
MFR- 1S002 SER. NO. 60983
NSN: 1005-01-435-1917
U.S. GOV.
MFI MANUFACTURING CO.
Fallbrook CA. 92028 www.mfiap.com
MODEL: U.S. MILITARY SOCOM

SPECIAL NOTE ON MARKING POSITION: All SOCOM fake silencer markings REGARDLESS of model / version will end up reading left to right from the right hand side of the weapon. (So if you see any photos of SOCOM Fake Silencers with lettering that reads any other way just note that those are obsolete photos.)

MFI has produced a legal version of the SOCOM Knights Armament Silencer (to meet current BATF specifications for a Fake Silencer / Non-Functional / Cosmetic Only ) here in the USA. MFI has been a Class II BAFT 07 Manufacturer + SOT & a DOD / Military Contractor so we have access to the real thing here to take measurements off of to assure as close a match as possible. The only area where we deviate from the original in the lettering is changed slightly so as not to violate Knights Armament Intellectual Property Rights. Everything else is almost identical to the real thing.